Author Index

A

  • Abassian, hamid Multi-objective decision making for risk allocation; Ant Colony Optimization model [Volume 21, Issue 55, 2020, Pages 44-54]
  • Abbasi, Elham Investigation the effect of probability distribution type of parameters on the reliability of truss structures [Volume 23, Issue 64, 2021, Pages 57-72]
  • Abbasianjahromi, Hamidreza A Quantitative model for Evaluation of PPP projects success, To attract private investment [Volume 21, Issue 57, 2020, Pages 28-37]
  • Abbasnejad, Alireza Improving Geotechnical Properties of Clay Using Cationic Polyelectrolyte and Nanoclay [Volume 23, Issue 64, 2021, Pages 4-15]
  • Abbasnejad, Alireza Influence of presence of deep mixed columns in railways tracks subgrade in reduce the vibrations from the train path [Volume 23, Issue 65, 2022, Pages 18-29]
  • Abbaszadeh, ALI Experimental Investigation of Ring foundation bearing capacity based on Encapsulated Geogrid-Sand System [Volume 22, Issue 61, 2021]
  • Abdollahi, Amir Seismic Performance Assessment of Steel Moment Frames Under the Consideration of Stiffness and Strength Eccentricity [Volume 21, Issue 57, 2020, Pages 16-27]
  • Adeli, Sasan Investigating the Effect of Asphalt Mixes in Resistance Sliding and traffic jams without urban traffic lights [Volume 19, Issue 46, 2017, Pages 18-30]
  • Adinehfar, Yahya Laboratory study of the effect of nanosilica on roller concrete used in road pavement [Volume 19, Issue 46, 2017, Pages 65-73]
  • Aeini, Majid The Investigation of Soil’s Chemical Components Effect on Excavation Wall Stability. [Volume 23, Issue 65, 2022, Pages 47-56]
  • Aeini, Majid The Investigation of Soil’s Chemical Components Effect on Excavation Wall Stability. [Volume 24, Issue 67, 2022]
  • Aghaei, Omid Effect of Micro-silica on Compressive Strength of Concrete under the Sulfate Attack [Volume 20, Issue 50, 2018, Pages 74-81]
  • Aghili Lotf, Milad Application of zeolite in concrete made with recycled aggregate concrete [Volume 18, Issue 45, 2017, Pages 41-50]
  • Ahmadi, Ali An Experimental Investigation on Flow Velocity in Fine-grained Copper Tailings with High Water Content under Vacuum Preloading [Volume 24, Issue 68, 2022]
  • Ahmadi, Hadi Effect of pozzolanic nanomaterials on one-dimensional settlement of cemented uniform sand [Volume 21, Issue 56, 2020, Pages 19-30]
  • Aliakbari Bidokhti, mohammadreza Investigation of the Storage Stability of polymer modified bitumen containing nanoparticles and estimation of the Marshall Stability of asphalt mixtures using artificial neural network [Volume 21, Issue 55, 2020, Pages 5-17]
  • Alimohammadi, Mohsen Evaluating the productivity of construction workers affected by addiction [Volume 18, Issue 44, 2016, Pages 41-50]
  • Alivand, Hossein Influence of presence of deep mixed columns in railways tracks subgrade in reduce the vibrations from the train path [Volume 23, Issue 65, 2022, Pages 18-29]
  • Amani, Maryam Investigating the responsibilities of the project manager in project life and its impact on the success of construction projects [Volume 18, Issue 45, 2017, Pages 61-71]
  • Amelsakhi, Masoud Stabilization of desert sand using Eco-friendly bio-polymer of Chitosan [Volume 23, Issue 62, 2021, Pages 22-30]
  • Amini, Behnam Investigating the Effect of Asphalt Mixes in Resistance Sliding and traffic jams without urban traffic lights [Volume 19, Issue 46, 2017, Pages 18-30]
  • Aminian Dehkordi, Ahmadreza Evaluation of the effect of frictional and viscous dampers on the behavior of moment steel frames under blast load [Volume 21, Issue 56, 2020, Pages 64-79]
  • Amir, Mohammad Javad Assessing the impact of the project line on fuel consumption and emission of pollutants in road transport [Volume 19, Issue 49, 2018, Pages 82-94]
  • Amirhosseini, Mahdi Assessment of Near-Field Directivity Effects on Seismic Behavior of Tall Moment Frames comprising of Identical Stiffness and Different Bays Configuration [Volume 21, Issue 56, 2020, Pages 5-18]
  • Aram, Mohammadreza Nonlinear Numerical Study of Impact of Rockets on RC Structures [Volume 18, Issue 45, 2017, Pages 16-27]
  • Asadian, Hojjat Optimization of steel building with Gravitational Search Algorithm (GSA) [Volume 22, Issue 58, 2020, Pages 65-72]
  • Asadollahfardi, Gholamreza The relationship between performance of health, safety and environment with job satisfaction of workers and skilled workers in the construction industry Case Study: The central building of the Martyr Foundation and the Affaires of Tehran [Volume 24, Issue 69, 2023]
  • Asakereh, Adel Effect of composite foundation columns to reduce the settlement of embankment on soft clay soil [Volume 20, Issue 52, 2018, Pages 3-16]
  • Ashrafi, Hamidreza Laboratory study of the effect of nanosilica on roller concrete used in road pavement [Volume 19, Issue 46, 2017, Pages 65-73]
  • Ashrafi, HamidReza effect of reliability under random imperfection distribution in double-layer scallop domes structures [Volume 24, Issue 69, 2023]
  • Ashrafian, Ali Evaluation of artificial intelligence methods based on metaheuristic algorithms for estimating the compressive strength of lightweight structural concrete containing leca [Volume 22, Issue 58, 2020, Pages 19-34]
  • Ashtiany, Mohsen Detection of failure in antisubmersible solid state based on the combination of finite element method and multi-objective genetic algorithm [Volume 18, Issue 44, 2016, Pages 5-18]
  • Atri, Adel Study of Geofoam Particle Effects on Improvement Geotechnical Properties of Sand-Clay Mixture [Volume 20, Issue 50, 2018, Pages 43-57]
  • Azhdarizadeh, Mostafa Evaluation of silica-fume effect on the mechanical properties of concrete made with coarse masonry recycled aggregates [Volume 23, Issue 63, 2021, Pages 18-29]
  • Aziminejad, Armin Wind Effect on Hexa-Sectored Scallop Domes [Volume 20, Issue 53, 2019, Pages 30-50]
  • Azmoodeh, Mohammad Analysis of Pedestrian Parameters on Transit-Oriented Development Performance (Case Study: Zone 6 of Tehran) [Volume 20, Issue 53, 2019, Pages 77-89]

B

  • Badakhshan, Ehsan Experimental Model for Shallow Foundation of Wind Turbines on Reinforced Sand with Geogrid [Volume 21, Issue 54, 2019, Pages 16-31]
  • Bagheri, Mansour Seismic Performance Assessment of Steel Moment Frames Under the Consideration of Stiffness and Strength Eccentricity [Volume 21, Issue 57, 2020, Pages 16-27]
  • Bagheri, Qasem Investigating the responsibilities of the project manager in project life and its impact on the success of construction projects [Volume 18, Issue 45, 2017, Pages 61-71]
  • Bagheri, Saman The Effect of Input Earthquake Characteristics on Ductility Demand of Multi-Story Building Frames [Volume 21, Issue 54, 2019, Pages 5-15]
  • Bahraminia, Gholam Abbas Experimental study of the effect of natural zeolite and nano-silica on the properties of self-compacting concrete cured in drinking water and sewage [Volume 22, Issue 58, 2020, Pages 47-64]
  • BARZEGAR BABAYI, EHSAN Determine the optimum airplane hangar shape to maintain stability against explosive loads [Volume 20, Issue 52, 2018, Pages 34-51]
  • Bathaei, Akbar Improving cyclic behavior of steel slit dampers with increasing slit width of yielding plate and studying its seismic performance [Volume 22, Issue 58, 2020, Pages 5-18]
  • Bayat, Arash Seismic behavior of copper shear wall with steel connector beam in high-order structures [Volume 18, Issue 45, 2017, Pages 5-15]
  • Bayat, Arash effect of reliability under random imperfection distribution in double-layer scallop domes structures [Volume 24, Issue 69, 2023]
  • Bayat, Mahmood The effect of geocell reinforcement on design of machine foundation with asymmetric load [Volume 24, Issue 66, 2022, Pages 27-37]
  • Baziar, Mohammadhasan Evaluation of the effect of accelerated dynamic transfer on the permanent displacement of earth systems in earthquake [Volume 18, Issue 44, 2016, Pages 31-40]
  • Behnam, Behrouz Loading and Seismic Design Provisions for Large Dish Antennas Steel Structures [Volume 19, Issue 49, 2018, Pages 6-24]
  • Behnam, Behrouz Pre- and Post-earthquake Fire Response of Partitioned Steel Structures: A Performance-based Approach [Volume 23, Issue 65, 2022, Pages 65-82]
  • Behnam, Behrouz Determination of earthquake insurance rate of existing steel building based on seismic vulnerability [Volume 21, Issue 57, 2020, Pages 5-15]
  • Behshad, Amir Effect of Curing in Acidic Environments on the Strength and Permeability of Concrete Containing Nano-silica and Rubber [Volume 21, Issue 57, 2020, Pages 72-81]
  • Behzadineghad, Hossain Evaluation of Settlement of Lurestan Rudbar earth and Rockfill Dam using Monitoring results and back analysis [Volume 22, Issue 59, 2020]
  • Berenjian, Javad Application of Feed Forward Neural Network along with Different Input Parameters for Predicting the Mechanical Properties of SCC [Volume 19, Issue 49, 2018, Pages 36-50]
  • Bolouri Bazaz, Jafar Experimental Investigation of Ring foundation bearing capacity based on Encapsulated Geogrid-Sand System [Volume 22, Issue 61, 2021]
  • Bolouri Bazaz, Jafar An Experimental Investigation on Flow Velocity in Fine-grained Copper Tailings with High Water Content under Vacuum Preloading [Volume 24, Issue 68, 2022]

C

  • Chavoshan, Mahmood Experimental study on the in-plane behavior of retrofitted brick walls using steel cables with self- centering approach [Volume 24, Issue 68, 2022]

D

  • Dabiri, Rouzbeh Study of Geofoam Particle Effects on Improvement Geotechnical Properties of Sand-Clay Mixture [Volume 20, Issue 50, 2018, Pages 43-57]
  • Dalvand, Ahmad Nonlinear Nonlinear Behavior of Double Flexible Steel System and Mega Controller with High Ductility [Volume 18, Issue 45, 2017, Pages 51-60]
  • Daneshvar, Yazdan Energy Efficiency of Small Buildings with Smart Cooling System in the Summer with Using BMI [Volume 23, Issue 63, 2021, Pages 45-56]
  • DarvishNezhad Aliabad, Mahdi Experimental Investigation on the Mechanical properties and determination of the optimal percentage of rubber in concretes containing rubber corrosion [Volume 22, Issue 60, 2020, Pages 19-30]
  • DarvishNezhad Aliabad, Zahra Experimental Investigation on the Mechanical properties and determination of the optimal percentage of rubber in concretes containing rubber corrosion [Volume 22, Issue 60, 2020, Pages 19-30]
  • Dehestani, Mehdi Numerical modelling of out of plane behavior of GFRP reinforced masonry walls [Volume 21, Issue 55, 2020, Pages 18-31]
  • Dehghani, Majid Estimation of the Effect of Large-Scale Signals on Regional Rainfall of Iran by Statistical Analysis [Volume 20, Issue 53, 2019, Pages 65-76]
  • Dehghani, Masoud Effect of composite foundation columns to reduce the settlement of embankment on soft clay soil [Volume 20, Issue 52, 2018, Pages 3-16]
  • Delnavaz, Ali The effect of barite aggregates on the strength of concrete and the rate of high-dose gamma rays [Volume 17, Issue 41, 2015, Pages 30-37]
  • Delnavaz, Ali Prediction of Bridge Damage Factors Using Decision Tree Technique (Case Study: Concrete Rad Bridges in ZANJAN Province-IRAN) [Volume 24, Issue 69, 2023]
  • Dezvareh, Ghorbanali Statistical analysis and optimization of the method of extracting vapors from contaminated soils to petroleum products [Volume 17, Issue 42, 2015, Pages 20-27]
  • Divandari, Hassan Investigation of the Storage Stability of polymer modified bitumen containing nanoparticles and estimation of the Marshall Stability of asphalt mixtures using artificial neural network [Volume 21, Issue 55, 2020, Pages 5-17]

E

  • Ebadi, Parviz Effect of RBS Beam-Column Connection on Dynamic Performance of Special Steel Plate Shear Wall in Short Frames Using Incremental Dynamic Analysis [Volume 23, Issue 62, 2021, Pages 62-73]
  • Ebrahimi far, Mohammad Experimental Model for Shallow Foundation of Wind Turbines on Reinforced Sand with Geogrid [Volume 21, Issue 54, 2019, Pages 16-31]
  • Eftekhari, Seyed Nasrollah Sensitivity analysis of the seismicity parameters used in PSHA to the input assumptions and variables [Volume 20, Issue 53, 2019, Pages 51-64]
  • Eftekhari, Seyed Nasrollah Comparing different data-driven ranking methods and selecting appropriate GMPEs for performing PSHA in Zagros zone [Volume 22, Issue 58, 2020, Pages 35-46]
  • Emami Kourandeh, Mohammad Analytical investigation on formation conditions of a stress-free surface in particles of a homogeneous cohesionless medium in trapdoor test [Volume 23, Issue 63, 2021, Pages 70-82]
  • Emami Kourandeh, Mohammad Analytical investigation on formation conditions of a stress-free surface in particles of a homogeneous cohesionless medium in trapdoor test [Volume 24, Issue 67, 2022]
  • Esfahani, Mohammadreza Investigation of the effect of tensile hardening of the above concrete on the behavior of reinforced concrete members with steel fittings [Volume 17, Issue 41, 2015, Pages 6-18]
  • Eshtehardian, Ehsan A meta-heuristic algorithm for solving the time-cost optimization problem with multiple execution modes in construction projects. [Volume 20, Issue 51, 2018, Pages 16-29]

F

  • Fadaei Dehcheshmeh, Mohamad Effect of converter slag and high furnace on compressive strength, flexural strength and initial bonding of cement [Volume 19, Issue 49, 2018, Pages 25-35]
  • Fallah, Ahmad Ali Experimental study on the in-plane behavior of retrofitted brick walls using steel cables with self- centering approach [Volume 24, Issue 68, 2022]
  • Falsafi Divband, Vahid Identifying and Ranking the Factors Affecting Construction Labor Productivity Using Artificial Neural Network and Grasshopper Optimization Algorithm [Volume 21, Issue 57, 2020, Pages 38-45]
  • Faraji, Sanaz Estimation of the Effect of Large-Scale Signals on Regional Rainfall of Iran by Statistical Analysis [Volume 20, Issue 53, 2019, Pages 65-76]
  • Fard Moradi Nia, Sina Resource-Constrained Project Scheduling Optimization by Genetic Algorithm [Volume 20, Issue 50, 2018, Pages 58-73]
  • Farghadani, Abolfazl Effect of RBS Beam-Column Connection on Dynamic Performance of Special Steel Plate Shear Wall in Short Frames Using Incremental Dynamic Analysis [Volume 23, Issue 62, 2021, Pages 62-73]
  • Farokhzad, Reza Detection of failure in antisubmersible solid state based on the combination of finite element method and multi-objective genetic algorithm [Volume 18, Issue 44, 2016, Pages 5-18]
  • Farokhzad, Reza Effect of different types of fibers on the static and dynamic viscosity of self-compacting concrete and its interaction on mechanical and Electrical Resistivity [Volume 22, Issue 59, 2020]
  • Faroughi, Alireza Effect of Variation of EBF Link Length along the Frame Height on High-Rise Building Performance and Damage Index [Volume 22, Issue 60, 2020, Pages 40-55]
  • Ferdousi, Adel Investigation into the current condition of the Sheikh Shahabuddin Ahari historical tomb and main characteristics of the retrofitting plan [Volume 23, Issue 64, 2021, Pages 73-82]
  • Foroutan, Mohammad Effect of the type of rebar cover and location of the structure on concrete durability and corrosion of rebar on the Oman Sea [Volume 18, Issue 45, 2017, Pages 28-40]
  • Forsatkar, Ehsan The proposed software model for optimization of multi-level earthquake operations in road construction projects [Volume 18, Issue 44, 2016, Pages 19-30]

G

  • Gerami, Mohsen Evaluation of the effects of higher modes in steel flexural frames under near earthquakes parallel to and perpendicular to faults [Volume 19, Issue 46, 2017, Pages 31-50]
  • Ghaffarpour Jahromi, Saeed The effect of geocell reinforcement on design of machine foundation with asymmetric load [Volume 24, Issue 66, 2022, Pages 27-37]
  • Ghalehnoi, Mansoor Investigation of the effect of tensile hardening of the above concrete on the behavior of reinforced concrete members with steel fittings [Volume 17, Issue 41, 2015, Pages 6-18]
  • Ghalehnovi, Mansoor The tensile hardness model of the above concrete is capable of handling the reinforced glass reinforced concrete reinforced concrete (GFRP) concrete samples [Volume 19, Issue 46, 2017, Pages 4-17]
  • Gharibi-Asl, Arezoo Effect of RBS Beam-Column Connection on Dynamic Performance of Special Steel Plate Shear Wall in Short Frames Using Incremental Dynamic Analysis [Volume 23, Issue 62, 2021, Pages 62-73]
  • Ghasemi, Javad Improving the dispersive soils with polypropylene fiber and lignosulfonate stabilizer [Volume 20, Issue 50, 2018, Pages 31-42]
  • Ghaseminejad, Vali Failure mechanisms in bucket foundations under pure and combined loading in sand [Volume 20, Issue 52, 2018, Pages 17-33]
  • Ghasemzade Mousavinezhad, Seyed Hossein The effect of steel and polypropylene composite fibers on the mechanical properties of concrete containing Scoria grit (Ghorveh nail) [Volume 17, Issue 42, 2015, Pages 48-58]
  • Ghodrati Amiri, Gholamreza Detection of failure in antisubmersible solid state based on the combination of finite element method and multi-objective genetic algorithm [Volume 18, Issue 44, 2016, Pages 5-18]
  • Gholami, Fatemeh Investigation of the performance of modified tuned liquid damper in controlling the response of a structure with linear and nonlinear behavior [Volume 21, Issue 54, 2019, Pages 57-71]
  • Gholampour, Sirous Identification and evaluation of risk factors and accidents in the stages of installation, commissioning and operation of tower cranes in construction projects [Volume 24, Issue 68, 2022]
  • Gholamzadeh Chitgar, Atefeh Application of Feed Forward Neural Network along with Different Input Parameters for Predicting the Mechanical Properties of SCC [Volume 19, Issue 49, 2018, Pages 36-50]
  • Ghorbani Shemshadsara, Yaser The effect of steel and polypropylene composite fibers on the mechanical properties of concrete containing Scoria grit (Ghorveh nail) [Volume 17, Issue 42, 2015, Pages 48-58]
  • Ghsemipanah, Amirhossein Experimental Model for Shallow Foundation of Wind Turbines on Reinforced Sand with Geogrid [Volume 21, Issue 54, 2019, Pages 16-31]
  • Goodarzizad, Payam Identifying and Ranking the Factors Affecting Construction Labor Productivity Using Artificial Neural Network and Grasshopper Optimization Algorithm [Volume 21, Issue 57, 2020, Pages 38-45]

H

  • Hafezalkotob, Ashkan Analysis and evalution of effective factors on project communications in Oil, Gas and power plants projects [Volume 22, Issue 60, 2020, Pages 56-74]
  • Haghbin, Maryam Investigating the effect of carbon fiber, nanoclay and lime on the behavior of gypsum clay soils [Volume 23, Issue 64, 2021, Pages 44-56]
  • Haghighi, Farshidreza A meta-heuristic algorithm for solving the time-cost optimization problem with multiple execution modes in construction projects. [Volume 20, Issue 51, 2018, Pages 16-29]
  • HajiAzizi, Mohammad The Investigation of Soil’s Chemical Components Effect on Excavation Wall Stability. [Volume 23, Issue 65, 2022, Pages 47-56]
  • Hamidian, Amir Evaluating the productivity of construction workers affected by addiction [Volume 18, Issue 44, 2016, Pages 41-50]
  • Hasani Nasab, Seyed Shahab Laboratory study of the effect of nanosilica on roller concrete used in road pavement [Volume 19, Issue 46, 2017, Pages 65-73]
  • Hasanshahi, Samira Investigation the effect of probability distribution type of parameters on the reliability of concrete structures [Volume 23, Issue 62, 2021, Pages 31-44]
  • Hasanzade, Seyed Ali Laboratory study of the effect of nanosilica on roller concrete used in road pavement [Volume 19, Issue 46, 2017, Pages 65-73]
  • Hashemi, Seyed Amir Hossein Energy Efficiency of Small Buildings with Smart Cooling System in the Summer with Using BMI [Volume 23, Issue 63, 2021, Pages 45-56]
  • Hashemi, Seyed AMIR Hossein Seismic hazard analysis and acceleration spectra for different seismic levels for retrofiting Gas pressure boost stations [Volume 21, Issue 57, 2020, Pages 56-71]
  • Hassanipour, Akbar Fragility Analysis of Special Steel Moment Frame with considering the Random Parameters [Volume 24, Issue 68, 2022]
  • HASSANVAND, POUYA Evaluation of the effect of frictional and viscous dampers on the behavior of moment steel frames under blast load [Volume 21, Issue 56, 2020, Pages 64-79]
  • Hatami, Farzad Seismic response of rectangular and cylindrical concrete tanks under near-fault and far-fault ground motions [Volume 23, Issue 65, 2022, Pages 5-14]
  • Hatami, Farzad Evaluation of Moisture Sensitivity of Modified Asphalt Mixtures with Nanofiber Carbon [Volume 24, Issue 66, 2022, Pages 61-65]
  • Hedayat, Amir Ahmad Fracture prediction of steel slit dampers subjected to cyclic loading [Volume 19, Issue 49, 2018, Pages 51-68]
  • Heidari, Ali Effect of converter slag and high furnace on compressive strength, flexural strength and initial bonding of cement [Volume 19, Issue 49, 2018, Pages 25-35]
  • Heidari, Ali Estimation of the duration of the earthquake using discrete wavelet theory [Volume 24, Issue 67, 2022]
  • Hekmat, Elias Fragility Analysis of Special Steel Moment Frame with considering the Random Parameters [Volume 24, Issue 68, 2022]
  • Hematian, Milad A meta-heuristic algorithm for solving the time-cost optimization problem with multiple execution modes in construction projects. [Volume 20, Issue 51, 2018, Pages 16-29]
  • Hemmati, Ali Effect of Micro-silica on Compressive Strength of Concrete under the Sulfate Attack [Volume 20, Issue 50, 2018, Pages 74-81]
  • Heristchian, Mahmoud Wind Effect on Hexa-Sectored Scallop Domes [Volume 20, Issue 53, 2019, Pages 30-50]
  • Heydari, Farzad Evaluation of Settlement of Lurestan Rudbar earth and Rockfill Dam using Monitoring results and back analysis [Volume 22, Issue 59, 2020]
  • Heydari, Pouya Application of mixed double-layer networks in the deck of bridges with short to medium bridges [Volume 17, Issue 42, 2015, Pages 13-19]
  • Hojatkashani, Ata Evaluation of the capacity of the final tunnel lining under earthquake conditions based on non-linear analysis of the ground structure [Volume 20, Issue 51, 2018, Pages 52-63]
  • Hojjat, Kaveh Evaluating the productivity of construction workers affected by addiction [Volume 18, Issue 44, 2016, Pages 41-50]
  • Hooshyaripor, Farhad Estimation of the Effect of Large-Scale Signals on Regional Rainfall of Iran by Statistical Analysis [Volume 20, Issue 53, 2019, Pages 65-76]
  • Hoseini Tabatabaei, Mahmoodreza Analysis of Continuous Beams and Bridge Frames using Moment Propagation [Volume 19, Issue 46, 2017, Pages 74-83]
  • Hoseinzadeh, Mohammad Numerical analysis of plate load test results in layered soils and comparison with the classic relations [Volume 20, Issue 50, 2018, Pages 19-30]
  • Hosseini, Mahmood Loading and Seismic Design Provisions for Large Dish Antennas Steel Structures [Volume 19, Issue 49, 2018, Pages 6-24]
  • Hosseini, Mojtaba Evaluation of the effect of frictional and viscous dampers on the behavior of moment steel frames under blast load [Volume 21, Issue 56, 2020, Pages 64-79]
  • Hosseini, Seyed Abbas Effect of Curing in Acidic Environments on the Strength and Permeability of Concrete Containing Nano-silica and Rubber [Volume 21, Issue 57, 2020, Pages 72-81]
  • Hosseini Lavassani, Seyed Hossein Assessment of Near-Field Directivity Effects on Seismic Behavior of Tall Moment Frames comprising of Identical Stiffness and Different Bays Configuration [Volume 21, Issue 56, 2020, Pages 5-18]
  • Hosseinzadeh, Mohammad Experimental Model for Shallow Foundation of Wind Turbines on Reinforced Sand with Geogrid [Volume 21, Issue 54, 2019, Pages 16-31]
  • Hosseinzadeh, Mohammadreza Multi-page damage elastic pattern with combination of axial and shear damage of concrete behavior [Volume 18, Issue 43, 2016, Pages 70-79]
  • Hoveidi, Hassan Assessing the impact of the project line on fuel consumption and emission of pollutants in road transport [Volume 19, Issue 49, 2018, Pages 82-94]

I

  • Isari, Mohsen Evaluation of Seismic Response of Real Topographies Using Time Domain 3D Boundary Elements Method [Volume 20, Issue 53, 2019, Pages 3-16]

J

  • Jafari, Marzie Jason-2 Altimetry Radial Error Modeling Using Coincidence Points; Case Study: Persian Gulf Region [Volume 19, Issue 46, 2017, Pages 51-64]
  • Jafari-Eskandari, Meisam Claims management and allocation of resources in construction projects based on Game Theory [Volume 22, Issue 60, 2020, Pages 31-39]
  • Jahangiri, Meisam Influence of presence of deep mixed columns in railways tracks subgrade in reduce the vibrations from the train path [Volume 23, Issue 65, 2022, Pages 18-29]
  • Jalaeefar, Ali Assessing the Efficiency of Active Control on Reducing Structural Response under Rapid Strain Rate [Volume 21, Issue 56, 2020, Pages 54-63]
  • Jalalnezhad Khorasani, Shima Analytical investigation on formation conditions of a stress-free surface in particles of a homogeneous cohesionless medium in trapdoor test [Volume 24, Issue 67, 2022]
  • Jalalnezhad Khorasani,, Shima Analytical investigation on formation conditions of a stress-free surface in particles of a homogeneous cohesionless medium in trapdoor test [Volume 23, Issue 63, 2021, Pages 70-82]
  • Jalalvand, Davood Studying of the Results of Deep Mixing of Lean Clay Using Laboratory and Field Methods [Volume 24, Issue 67, 2022]
  • Jalili, Alireza Estimation of the duration of the earthquake using discrete wavelet theory [Volume 24, Issue 67, 2022]
  • Jalili, Mohammad Hosein Stabilization of desert sand using Eco-friendly bio-polymer of Chitosan [Volume 23, Issue 62, 2021, Pages 22-30]
  • Jamali, MEHDI Identification of effective criteria for the selection of contractors in the South Zagros Oil and Gas Company [Volume 22, Issue 59, 2020]
  • Jamali, Milad Evaluation of artificial intelligence methods based on metaheuristic algorithms for estimating the compressive strength of lightweight structural concrete containing leca [Volume 22, Issue 58, 2020, Pages 19-34]
  • Janimoosa, Ali Nonlinear behavior of steel shear walls [Volume 17, Issue 42, 2015, Pages 4-12]
  • Javaheri Barforooshi, Maedeh A meta-heuristic algorithm for solving the time-cost optimization problem with multiple execution modes in construction projects. [Volume 20, Issue 51, 2018, Pages 16-29]
  • Jazirian, Iraj Jason-2 Altimetry Radial Error Modeling Using Coincidence Points; Case Study: Persian Gulf Region [Volume 19, Issue 46, 2017, Pages 51-64]
  • Jiryaei Sharahi, Morteza Stabilization of desert sand using Eco-friendly bio-polymer of Chitosan [Volume 23, Issue 62, 2021, Pages 22-30]

K

  • Kaboudan, Alireza Regression Analysis of Concrete Permeability Containing Different Kinds of Aggregates and Cement Pastes [Volume 22, Issue 59, 2020]
  • Kachooee, Ali Evaluation the behavior of concentric braces with bounded local fuse based on experimental and numerical study [Volume 20, Issue 52, 2018, Pages 66-81]
  • Kafaeii Kavoshian, Nazanin Laboratory study and numerical analysis of the compressive strength of a sandwich structure with a modern honeycomb core used in the manufacturing industry [Volume 17, Issue 42, 2015, Pages 59-68]
  • Kafi, Mohammad Ali Evaluation the behavior of concentric braces with bounded local fuse based on experimental and numerical study [Volume 20, Issue 52, 2018, Pages 66-81]
  • Kamgar, Reza Investigation of the performance of modified tuned liquid damper in controlling the response of a structure with linear and nonlinear behavior [Volume 21, Issue 54, 2019, Pages 57-71]
  • Karbasi, Mohammad Investigating the Seismic Function of a Specific Concrete Framing Frame Using Nonlinear Incremental Dynamic Analysis (IDA) [Volume 17, Issue 41, 2015, Pages 51-60]
  • Karbasi Ravari, Mahin Investigation of dependencies of geotechnical parameters with topography and geology of Arak city [Volume 17, Issue 42, 2015, Pages 39-47]
  • Kashi, Amin Application of polymeric mortar for increasing the durability of GFRP rounded specimens in the Persian Gulf tidal area [Volume 18, Issue 43, 2016, Pages 5-13]
  • Kavianpoor, Mohammadreza Intelligent Modeling of Turbulent Channel Flow Based on Direct Numerical Simulation Data [Volume 20, Issue 50, 2018, Pages 5-18]
  • Kazemeini, Mohammad Javad Investigation of Effect and Comparison of Microsilica and Nanosilica of Clayey Fine Grained Soils Strength Stabilized with Lime by CBR test [Volume 22, Issue 61, 2021]
  • KAZEMI, MAJID Experimental Investigation of Ring foundation bearing capacity based on Encapsulated Geogrid-Sand System [Volume 22, Issue 61, 2021]
  • Kazerooni, Afshin Laboratory study and numerical analysis of the compressive strength of a sandwich structure with a modern honeycomb core used in the manufacturing industry [Volume 17, Issue 42, 2015, Pages 59-68]
  • Khabiri, Mohammad Mehdi Identifying Factors Affecting Cycling Safety Using Factor Analysis and Classification - A Case Study of Isfahan and Yazd [Volume 22, Issue 60, 2020, Pages 5-18]
  • Khademi, Alireza Resource-Constrained Project Scheduling Optimization by Genetic Algorithm [Volume 20, Issue 50, 2018, Pages 58-73]
  • Khalilzadeh, Mohammad Proposing a comprehensive model for projects integrated quality, cost, schedule and risk monitoring in the EVM [Volume 20, Issue 52, 2018, Pages 52-65]
  • Khalilzadeh, Mohammad Analysis and evalution of effective factors on project communications in Oil, Gas and power plants projects [Volume 22, Issue 60, 2020, Pages 56-74]
  • Khanjani, Majid Experimental study behavior of anchor in flexible retaining walls [Volume 23, Issue 65, 2022, Pages 57-64]
  • Kharaghani, Mahdi Experimental Model for Shallow Foundation of Wind Turbines on Reinforced Sand with Geogrid [Volume 21, Issue 54, 2019, Pages 16-31]
  • Khazaei, Jahangir Study of the effect corner angle on deformations and failure surfaces of soil nailed wall [Volume 22, Issue 59, 2020]
  • Khazaei, Jahangir Studying of the Results of Deep Mixing of Lean Clay Using Laboratory and Field Methods [Volume 24, Issue 67, 2022]
  • Kheiry Ghojeh Biglou, Milad Numerical simulation of the effect of uplift on seismic behavior of uncontrolled surface steel tanks with Abaqus software [Volume 22, Issue 61, 2021]
  • Khesal, Tahereh Proposing a comprehensive model for projects integrated quality, cost, schedule and risk monitoring in the EVM [Volume 20, Issue 52, 2018, Pages 52-65]
  • Khosravi, Fereydoon Nonlinear FE modeling of RC frames under progressive collapse [Volume 20, Issue 52, 2018, Pages 82-93]
  • Kiani, Mahdi Assessing the Efficiency of Active Control on Reducing Structural Response under Rapid Strain Rate [Volume 21, Issue 56, 2020, Pages 54-63]
  • Komasi, Mahdi Investigating the Seismic Function of a Specific Concrete Framing Frame Using Nonlinear Incremental Dynamic Analysis (IDA) [Volume 17, Issue 41, 2015, Pages 51-60]
  • Kowsari, Milad Sensitivity analysis of the seismicity parameters used in PSHA to the input assumptions and variables [Volume 20, Issue 53, 2019, Pages 51-64]
  • Kowsari, Milad Comparing different data-driven ranking methods and selecting appropriate GMPEs for performing PSHA in Zagros zone [Volume 22, Issue 58, 2020, Pages 35-46]

L

  • Lajevardi, Seyed Hamid Experimental study behavior of anchor in flexible retaining walls [Volume 23, Issue 65, 2022, Pages 57-64]

M

  • Maalek, Shahrokh Application of mixed double-layer networks in the deck of bridges with short to medium bridges [Volume 17, Issue 42, 2015, Pages 13-19]
  • Maghami, Shahram Evaluation of Seismic Response of Real Topographies Using Time Domain 3D Boundary Elements Method [Volume 20, Issue 53, 2019, Pages 3-16]
  • Majidi, Noorollah Estimation of the duration of the earthquake using discrete wavelet theory [Volume 24, Issue 67, 2022]
  • Majidpour, Ali Presentation of a new computational method for shell-retaining wall performance using Fourier series [Volume 18, Issue 44, 2016, Pages 51-60]
  • Maleki, Niloofar Evaluation of artificial intelligence methods based on metaheuristic algorithms for estimating the compressive strength of lightweight structural concrete containing leca [Volume 22, Issue 58, 2020, Pages 19-34]
  • Mansouri, Ramin Attitude analysis towards the factors affecting construction violations Case study: Sirjan city [Volume 22, Issue 61, 2021]
  • Mardani, Iman Theoretical and Soft Dynamic Study of the Goodwill Wall Stabilized by the Pile Group in Comparison to Nailing Method [Volume 18, Issue 43, 2016, Pages 38-51]
  • Mardookhpour, Alireza Numerical simulation of the effect of uplift on seismic behavior of uncontrolled surface steel tanks with Abaqus software [Volume 22, Issue 61, 2021]
  • Mardookhpour, Alireza Experimentally evaluation of mechanical properties of activated alkaline slag concrete containing nanosilica and polyolefin fibers [Volume 23, Issue 63, 2021, Pages 57-69]
  • Mashayekhi, Amirhesam Evaluation of the effects of higher modes in steel flexural frames under near earthquakes parallel to and perpendicular to faults [Volume 19, Issue 46, 2017, Pages 31-50]
  • Matoo, Fatemeh Analytical and numerical analysis of the effect of beam beam parameters on the behavior of connective steel shear walls under quasi-static quake loads [Volume 17, Issue 41, 2015, Pages 19-29]
  • Mazroi, Ali Experimental Investigation on the Mechanical properties and determination of the optimal percentage of rubber in concretes containing rubber corrosion [Volume 22, Issue 60, 2020, Pages 19-30]
  • Mehrabi Moghadam, Amin Evaluation of Seismic Risk Effect on Total Reliability Index of Structures, Case Study of Concrete Flexible Frame Frames [Volume 18, Issue 43, 2016, Pages 26-37]
  • Mehranzadeh, Mehdi Irregularity effect of RC Frame due to Placement on Sloping Surface under Blast Loading [Volume 24, Issue 66, 2022, Pages 38-47]
  • Meshkat-Dini, Afshin Assessment of Near-Field Directivity Effects on Seismic Behavior of Tall Moment Frames comprising of Identical Stiffness and Different Bays Configuration [Volume 21, Issue 56, 2020, Pages 5-18]
  • Minavand, Mahmood Investigation the effect of probability distribution type of parameters on the reliability of concrete structures [Volume 23, Issue 62, 2021, Pages 31-44]
  • Minavand, Mahmood Investigation the effect of probability distribution type of parameters on the reliability of truss structures [Volume 23, Issue 64, 2021, Pages 57-72]
  • Mirhosseini, Seyed Mohammad Experimental study behavior of anchor in flexible retaining walls [Volume 23, Issue 65, 2022, Pages 57-64]
  • Miri, Mahmood Effect of the type of rebar cover and location of the structure on concrete durability and corrosion of rebar on the Oman Sea [Volume 18, Issue 45, 2017, Pages 28-40]
  • Miri, Mahmood Provides a method for design based on probabilistic seismic performance [Volume 17, Issue 42, 2015, Pages 28-38]
  • Mirjalili, Alireza Experimental study on the in-plane behavior of retrofitted brick walls using steel cables with self- centering approach [Volume 24, Issue 68, 2022]
  • Mirzaei Fathkohi, Mohammad Evaluation of Moisture Sensitivity of Modified Asphalt Mixtures with Nanofiber Carbon [Volume 24, Issue 66, 2022, Pages 61-65]
  • Moayedi, Hossein Experimental study of bearing capacity of strip footings near the retaining walls reinforced with grid-anchor [Volume 20, Issue 51, 2018, Pages 30-38]
  • Moghbeli, Adel Artificial neural network for Shear Strength assessment of slender reinforced concrete beams without stirrup [Volume 21, Issue 55, 2020, Pages 54-63]
  • Mohamadiani, Amin Experimental study of bearing capacity of strip footings near the retaining walls reinforced with grid-anchor [Volume 20, Issue 51, 2018, Pages 30-38]
  • Mohammadi, Hamid Jason-2 Altimetry Radial Error Modeling Using Coincidence Points; Case Study: Persian Gulf Region [Volume 19, Issue 46, 2017, Pages 51-64]
  • Mohammadi Golafshani, Emadaldin Identifying and Ranking the Factors Affecting Construction Labor Productivity Using Artificial Neural Network and Grasshopper Optimization Algorithm [Volume 21, Issue 57, 2020, Pages 38-45]
  • Mohammadpour, Reza The Effect of Input Earthquake Characteristics on Ductility Demand of Multi-Story Building Frames [Volume 21, Issue 54, 2019, Pages 5-15]
  • Mohebi, Benyamin Detection of failure in antisubmersible solid state based on the combination of finite element method and multi-objective genetic algorithm [Volume 18, Issue 44, 2016, Pages 5-18]
  • Mokhberi, Mehdi Improving the dispersive soils with polypropylene fiber and lignosulfonate stabilizer [Volume 20, Issue 50, 2018, Pages 31-42]
  • Mokhberi, Mehdi Experimental investigation on the effects of nanosilica and polypropylene fiber on the geotechnical characteristics of the expansive soils under freeze-thaw cycles [Volume 22, Issue 59, 2020]
  • Mollahasani, MohammadHosein Evaluation of the effect of accelerated dynamic transfer on the permanent displacement of earth systems in earthquake [Volume 18, Issue 44, 2016, Pages 31-40]
  • Mollaienia, Mahmoodreza Analysis of Continuous Beams and Bridge Frames using Moment Propagation [Volume 19, Issue 46, 2017, Pages 74-83]
  • Monirabbasi, Armin Identification and qualitative assessment of lump Sum Contract risks [Volume 22, Issue 61, 2021]
  • Moodi, Faramarz Application of polymeric mortar for increasing the durability of GFRP rounded specimens in the Persian Gulf tidal area [Volume 18, Issue 43, 2016, Pages 5-13]
  • Moosavinezhad, Seyed Ali Hosseini Effect of Curing in Acidic Environments on the Strength and Permeability of Concrete Containing Nano-silica and Rubber [Volume 21, Issue 57, 2020, Pages 72-81]
  • Moradi, Golam Influence of presence of deep mixed columns in railways tracks subgrade in reduce the vibrations from the train path [Volume 23, Issue 65, 2022, Pages 18-29]
  • Moslehitabar, Afshin Nonlinear behavior of steel shear walls [Volume 17, Issue 42, 2015, Pages 4-12]
  • Motaghed, Sasan Evaluation of Seismic Risk Effect on Total Reliability Index of Structures, Case Study of Concrete Flexible Frame Frames [Volume 18, Issue 43, 2016, Pages 26-37]
  • Mousavi, Seyed Hojjatollah Investigating the size effect of recycled concrete containing steel fibers [Volume 20, Issue 51, 2018, Pages 5-15]
  • Mousavi, Seyed Roohollah Investigating the size effect of recycled concrete containing steel fibers [Volume 20, Issue 51, 2018, Pages 5-15]
  • Mozaffar, Mohammad Mahdi i Investigating the Effect of Stakeholder Characteristics on the Performance of Natural Disaster Recovery Projects: Post-earthquake Transportation Network (Case study: Red Crescent Organization) [Volume 23, Issue 65, 2022, Pages 28-45]
  • Mozaffarinejad, Arefaddinmohammad Attitude analysis towards the factors affecting construction violations Case study: Sirjan city [Volume 22, Issue 61, 2021]

N

  • Nabi Beidhendi, Gholamreza Assessing the impact of the project line on fuel consumption and emission of pollutants in road transport [Volume 19, Issue 49, 2018, Pages 82-94]
  • NABIZADEH, ALI Analysis of influence of asynchronous excavation of twin tunnel on ground surface settlement in clayey fine soils [Volume 23, Issue 62, 2021, Pages 5-11]
  • Naderi, Mahmood Regression Analysis of Concrete Permeability Containing Different Kinds of Aggregates and Cement Pastes [Volume 22, Issue 59, 2020]
  • Najafi Moghaddam Gilani, Vahid Evaluation of Moisture Sensitivity of Modified Asphalt Mixtures with Nanofiber Carbon [Volume 24, Issue 66, 2022, Pages 61-65]
  • Nazariafshar, Javad Investigation of Effect and Comparison of Microsilica and Nanosilica of Clayey Fine Grained Soils Strength Stabilized with Lime by CBR test [Volume 22, Issue 61, 2021]
  • Nazarpour, Hadi A Study of Least Construction Status in Iran's Development Projects; A Case Study: Golestan Provincial Schools' Modernization Office [Volume 18, Issue 43, 2016, Pages 52-69]
  • Nazemi, Mohammad Investigation of Tunnel induced subsidence; case study: Tehran line 6 subway tunnel construction and the resulting subsidence near Shah Abdolaziz shrine [Volume 24, Issue 68, 2022]
  • Nazlabadi, Hamed Nonlinear Numerical Study of Impact of Rockets on RC Structures [Volume 18, Issue 45, 2017, Pages 16-27]
  • Nooshin, Hoshyar Wind Effect on Hexa-Sectored Scallop Domes [Volume 20, Issue 53, 2019, Pages 30-50]

O

  • Omidinasab, Fereydoon Effect of metakaolin on mechanical properties of calcium aluminate cement-based concrete at high temperatures [Volume 21, Issue 55, 2020, Pages 64-73]
  • Omidtabrizi, Farbod Seismic response of rectangular and cylindrical concrete tanks under near-fault and far-fault ground motions [Volume 23, Issue 65, 2022, Pages 5-14]

P

  • Palasi, Masoud Application of zeolite in concrete made with recycled aggregate concrete [Volume 18, Issue 45, 2017, Pages 41-50]
  • Panji, Mehdi Seismic ground response in the presence of underground elliptical soft inclusions subjected to propagating incident SH-waves [Volume 20, Issue 51, 2018, Pages 64-83]
  • Parchamijalal, Mohammad The proposed software model for optimization of multi-level earthquake operations in road construction projects [Volume 18, Issue 44, 2016, Pages 19-30]
  • Peyman, Farzad Numerical analysis of the behavior of undrained sands in monotonic loading based on standardization of experimental results [Volume 24, Issue 67, 2022]
  • Pouraziz, Hamed Experimental Study of Wollastonite Powder Effects on Dispersive Potential and Mechanical Properties of Clay [Volume 24, Issue 69, 2023]
  • Pourhatami, Bahador Loading and Seismic Design Provisions for Large Dish Antennas Steel Structures [Volume 19, Issue 49, 2018, Pages 6-24]

R

  • Radvand, Maryam Claims management and allocation of resources in construction projects based on Game Theory [Volume 22, Issue 60, 2020, Pages 31-39]
  • Rahaei, Alireza Investigating the responsibilities of the project manager in project life and its impact on the success of construction projects [Volume 18, Issue 45, 2017, Pages 61-71]
  • Rahaei, Alireza - [Volume 22, Issue 59, 2020, Pages 3-4]
  • Rahaie, Alireza - [Volume 17, Issue 41, 2015, Pages 3-5]
  • Rahdar, Hoseinali The tensile hardness model of the above concrete is capable of handling the reinforced glass reinforced concrete reinforced concrete (GFRP) concrete samples [Volume 19, Issue 46, 2017, Pages 4-17]
  • Rahdar, Hossein Ali Investigation of the effect of tensile hardening of the above concrete on the behavior of reinforced concrete members with steel fittings [Volume 17, Issue 41, 2015, Pages 6-18]
  • Rajabi, Elham Intelligent Modeling of Turbulent Channel Flow Based on Direct Numerical Simulation Data [Volume 20, Issue 50, 2018, Pages 5-18]
  • Rakhshanimehr, Mehrollah Effect of the type of rebar cover and location of the structure on concrete durability and corrosion of rebar on the Oman Sea [Volume 18, Issue 45, 2017, Pages 28-40]
  • Rakhshanimehr, Mehrollah Provides a method for design based on probabilistic seismic performance [Volume 17, Issue 42, 2015, Pages 28-38]
  • Ramezani, Meysam Improving cyclic behavior of steel slit dampers with increasing slit width of yielding plate and studying its seismic performance [Volume 22, Issue 58, 2020, Pages 5-18]
  • Ramezanianpour, Aliakbar The Effect of Cationic Type on Chloride Attack in Control Concrete Mortars and Containing Pozzolan Silica Soot in a Sulfate-Chloride Combined Environment [Volume 18, Issue 44, 2016, Pages 61-68]
  • Ramezanianpour, Aliakbar Application of polymeric mortar for increasing the durability of GFRP rounded specimens in the Persian Gulf tidal area [Volume 18, Issue 43, 2016, Pages 5-13]
  • Ramezanianpour, Amir Mohammad Application of zeolite in concrete made with recycled aggregate concrete [Volume 18, Issue 45, 2017, Pages 41-50]
  • Rastian Tehrani, Arash Investigate the type of connection of the candle to the slab and the pattern of the piles on the performance of the candle group under the lateral load [Volume 17, Issue 41, 2015, Pages 38-50]
  • Ravanshadnia, mehdi Effect of nanosilica, nano halloysite and nano montmorillonite on the mechanical properties of concrete pavements [Volume 24, Issue 66, 2022, Pages 16-26]
  • RAYATI DAMAVANDI, morteza A hybrid model for risk assessment in infrastructure projects: the case of small-scale power plants [Volume 21, Issue 54, 2019, Pages 41-56]
  • Razavian Amrei, Seyed Ali Fragility Analysis of Special Steel Moment Frame with considering the Random Parameters [Volume 24, Issue 68, 2022]
  • RazaviTosee, SeyedVahid Irregularity effect of RC Frame due to Placement on Sloping Surface under Blast Loading [Volume 24, Issue 66, 2022, Pages 38-47]
  • Rezaie, Behjat Statistical analysis and optimization of the method of extracting vapors from contaminated soils to petroleum products [Volume 17, Issue 42, 2015, Pages 20-27]
  • Rezaiee Pazhand, Mohammad Analysis of Continuous Beams and Bridge Frames using Moment Propagation [Volume 19, Issue 46, 2017, Pages 74-83]
  • Riahi Dehkordi, Erfan The Effect of Cationic Type on Chloride Attack in Control Concrete Mortars and Containing Pozzolan Silica Soot in a Sulfate-Chloride Combined Environment [Volume 18, Issue 44, 2016, Pages 61-68]
  • Riahi Dehkordi, Erfan Investigating the responsibilities of the project manager in project life and its impact on the success of construction projects [Volume 18, Issue 45, 2017, Pages 61-71]
  • Rismanian Yazdi, Batool Experimental investigation of the seismic behavior of damaged unreinforced masonry walls retrofitted with concrete ties [Volume 24, Issue 69, 2023]
  • Roghani, Amirhesam Effect of steel and polypropylene fibers on the mechanical properties of high strength concrete under cyclic loading [Volume 23, Issue 62, 2021, Pages 45-61]
  • Rohanimanesh, Mohammad Sadegh Fragility Analysis of Special Steel Moment Frame with considering the Random Parameters [Volume 24, Issue 68, 2022]
  • Rowshanzamir, Mohammad Ali Failure mechanisms in bucket foundations under pure and combined loading in sand [Volume 20, Issue 52, 2018, Pages 17-33]

S

  • Saba, Hamidreza Theoretical and Soft Dynamic Study of the Goodwill Wall Stabilized by the Pile Group in Comparison to Nailing Method [Volume 18, Issue 43, 2016, Pages 38-51]
  • Saba, Hamidreza Nonlinear behavior of steel shear walls [Volume 17, Issue 42, 2015, Pages 4-12]
  • Saba, Hamid Reza Experimental study behavior of anchor in flexible retaining walls [Volume 23, Issue 65, 2022, Pages 57-64]
  • Sabour, Mohammadreza Statistical analysis and optimization of the method of extracting vapors from contaminated soils to petroleum products [Volume 17, Issue 42, 2015, Pages 20-27]
  • Sabouri, Jamshid Optimization of steel building with Gravitational Search Algorithm (GSA) [Volume 22, Issue 58, 2020, Pages 65-72]
  • Sabouri Ghomi, Saeid Analytical and numerical analysis of the effect of beam beam parameters on the behavior of connective steel shear walls under quasi-static quake loads [Volume 17, Issue 41, 2015, Pages 19-29]
  • Sabzehparvar, Majid Energy Efficiency of Small Buildings with Smart Cooling System in the Summer with Using BMI [Volume 23, Issue 63, 2021, Pages 45-56]
  • Sadeghi, Arzhang Experimental and theoretical investigation of the buckling of the honeycomb [Volume 18, Issue 43, 2016, Pages 14-25]
  • Sadrnejad, Seyed Amirodin Multi-page damage elastic pattern with combination of axial and shear damage of concrete behavior [Volume 18, Issue 43, 2016, Pages 70-79]
  • Saeedi, Amin The relationship between performance of health, safety and environment with job satisfaction of workers and skilled workers in the construction industry Case Study: The central building of the Martyr Foundation and the Affaires of Tehran [Volume 24, Issue 69, 2023]
  • Saiyadi, Mahdi The Effect of Input Earthquake Characteristics on Ductility Demand of Multi-Story Building Frames [Volume 21, Issue 54, 2019, Pages 5-15]
  • Sajedi, Seyed Fathollah Experimental study of the effect of natural zeolite and nano-silica on the properties of self-compacting concrete cured in drinking water and sewage [Volume 22, Issue 58, 2020, Pages 47-64]
  • Sajedi, Seyed Fathollah Evaluation of silica-fume effect on the mechanical properties of concrete made with coarse masonry recycled aggregates [Volume 23, Issue 63, 2021, Pages 18-29]
  • Salari, Mehdi Seismic Performance of RC Buildings with Irregularities in Plan and Height, Retrofitted Using Steel Bracing [Volume 22, Issue 61, 2021]
  • Salavatiha, Aniseh The effect of barite aggregates on the strength of concrete and the rate of high-dose gamma rays [Volume 17, Issue 41, 2015, Pages 30-37]
  • Salehi, Reza The combined effect of nano-silica and Steel fibers on impact resistance of concrete [Volume 22, Issue 58, 2020, Pages 73-85]
  • Salimi, Zakieh Identifying Factors Affecting Cycling Safety Using Factor Analysis and Classification - A Case Study of Isfahan and Yazd [Volume 22, Issue 60, 2020, Pages 5-18]
  • Sanaeepour, Hadi Designing a model for transferring new manufacturing technologies in construction projects with an entrepreneurial approach [Volume 23, Issue 62, 2021, Pages 12-21]
  • Sanaeirad, Ali Investigation of dependencies of geotechnical parameters with topography and geology of Arak city [Volume 17, Issue 42, 2015, Pages 39-47]
  • Sanaeirad, Ali Investigate the type of connection of the candle to the slab and the pattern of the piles on the performance of the candle group under the lateral load [Volume 17, Issue 41, 2015, Pages 38-50]
  • Sayyadpour, Hadi Sensitivity analysis of the seismicity parameters used in PSHA to the input assumptions and variables [Volume 20, Issue 53, 2019, Pages 51-64]
  • Sayyadpour, Hadi Comparing different data-driven ranking methods and selecting appropriate GMPEs for performing PSHA in Zagros zone [Volume 22, Issue 58, 2020, Pages 35-46]
  • SEGHATEH MOJTAHEDI, ALIREZA Analysis of influence of asynchronous excavation of twin tunnel on ground surface settlement in clayey fine soils [Volume 23, Issue 62, 2021, Pages 5-11]
  • Seify Asghshahr, Mohammadreza Reliability-based Design Optimization of Reinforced Concrete Frame using Particle Swarm Algorithm and Performance Measure Approach [Volume 24, Issue 66, 2022, Pages 5-15]
  • Shafabakhsh, Gholamali Investigation of the Storage Stability of polymer modified bitumen containing nanoparticles and estimation of the Marshall Stability of asphalt mixtures using artificial neural network [Volume 21, Issue 55, 2020, Pages 5-17]
  • Shahbazi Karami, Javad Laboratory study and numerical analysis of the compressive strength of a sandwich structure with a modern honeycomb core used in the manufacturing industry [Volume 17, Issue 42, 2015, Pages 59-68]
  • Shahnazari, Habib Evaluating the productivity of construction workers affected by addiction [Volume 18, Issue 44, 2016, Pages 41-50]
  • Shahsavani, Sajad Experimental investigation on the effects of nanosilica and polypropylene fiber on the geotechnical characteristics of the expansive soils under freeze-thaw cycles [Volume 22, Issue 59, 2020]
  • Shakeri, Eghbal Effect of Coronavirus Pandemic on the Road Building Projects Performance and the Subsequent Effect on the Project Stakeholders [Volume 22, Issue 60, 2020, Pages 75-84]
  • SHAKERI, HEDIEH Analysis and evalution of effective factors on project communications in Oil, Gas and power plants projects [Volume 22, Issue 60, 2020, Pages 56-74]
  • Shams Maleki, Yazdan Studying of the Results of Deep Mixing of Lean Clay Using Laboratory and Field Methods [Volume 24, Issue 67, 2022]
  • Sharifi, Yasser Artificial neural network for Shear Strength assessment of slender reinforced concrete beams without stirrup [Volume 21, Issue 55, 2020, Pages 54-63]
  • Shokoohfar, Ahmad Nonlinear FE modeling of RC frames under progressive collapse [Volume 20, Issue 52, 2018, Pages 82-93]
  • Shokoohfar, Ahmad The combined effect of nano-silica and Steel fibers on impact resistance of concrete [Volume 22, Issue 58, 2020, Pages 73-85]
  • Shokoohfar, Ahmad Effect of steel and polypropylene fibers on the mechanical properties of high strength concrete under cyclic loading [Volume 23, Issue 62, 2021, Pages 45-61]
  • Siahpolo, Navid Evaluation of the effects of higher modes in steel flexural frames under near earthquakes parallel to and perpendicular to faults [Volume 19, Issue 46, 2017, Pages 31-50]
  • Sirani, Amir Experimental and theoretical investigation of the buckling of the honeycomb [Volume 18, Issue 43, 2016, Pages 14-25]
  • Sivandipour, Abas Nonlinear Nonlinear Behavior of Double Flexible Steel System and Mega Controller with High Ductility [Volume 18, Issue 45, 2017, Pages 51-60]
  • Sivandi-Pour, Abbas Evaluation the Effects of Elements Nonlinear Deformation on Seismic Vulnerability of Irregular Steel Buildings [Volume 20, Issue 51, 2018, Pages 39-51]
  • Sobhkhiz Foumani, Ramtin Numerical simulation of the effect of uplift on seismic behavior of uncontrolled surface steel tanks with Abaqus software [Volume 22, Issue 61, 2021]
  • Sohrabi-Bidar, Abdullah Evaluation of Seismic Response of Real Topographies Using Time Domain 3D Boundary Elements Method [Volume 20, Issue 53, 2019, Pages 3-16]
  • Solimani Dashtaki, Mehrnaz Effect of converter slag and high furnace on compressive strength, flexural strength and initial bonding of cement [Volume 19, Issue 49, 2018, Pages 25-35]
  • Soltani, Roya Proposing a comprehensive model for projects integrated quality, cost, schedule and risk monitoring in the EVM [Volume 20, Issue 52, 2018, Pages 52-65]

T

  • Taheri Amiri, Mohammad Javad A Study of Least Construction Status in Iran's Development Projects; A Case Study: Golestan Provincial Schools' Modernization Office [Volume 18, Issue 43, 2016, Pages 52-69]
  • Taheri Amiri, Mohammad Javad A meta-heuristic algorithm for solving the time-cost optimization problem with multiple execution modes in construction projects. [Volume 20, Issue 51, 2018, Pages 16-29]
  • Taheri Amiri, Mohammad Javad Evaluation of artificial intelligence methods based on metaheuristic algorithms for estimating the compressive strength of lightweight structural concrete containing leca [Volume 22, Issue 58, 2020, Pages 19-34]
  • Tarinejad, Reza Evaluation of Seismic Response of Real Topographies Using Time Domain 3D Boundary Elements Method [Volume 20, Issue 53, 2019, Pages 3-16]
  • Tehrani, Payam Seismic Performance of RC Buildings with Irregularities in Plan and Height, Retrofitted Using Steel Bracing [Volume 22, Issue 61, 2021]
  • Tohidi, Hojat Effect of composite foundation columns to reduce the settlement of embankment on soft clay soil [Volume 20, Issue 52, 2018, Pages 3-16]
  • Torkzadeh Mahani, Mohamad Moein Fracture prediction of steel slit dampers subjected to cyclic loading [Volume 19, Issue 49, 2018, Pages 51-68]

V

  • Vadoodi, Hamidreza The combined effect of nano-silica and Steel fibers on impact resistance of concrete [Volume 22, Issue 58, 2020, Pages 73-85]
  • Vakili, Amirhosain Improving the dispersive soils with polypropylene fiber and lignosulfonate stabilizer [Volume 20, Issue 50, 2018, Pages 31-42]
  • Vakili, Amir Hossein Experimental investigation on the effects of nanosilica and polypropylene fiber on the geotechnical characteristics of the expansive soils under freeze-thaw cycles [Volume 22, Issue 59, 2020]
  • Valipour, Alireza Identification of effective criteria for the selection of contractors in the South Zagros Oil and Gas Company [Volume 22, Issue 59, 2020]
  • Vaseghi Amiri, Maryam Numerical modelling of out of plane behavior of GFRP reinforced masonry walls [Volume 21, Issue 55, 2020, Pages 18-31]
  • Vedad, Amin Seismic Performance Assessment of Steel Moment Frames Under the Consideration of Stiffness and Strength Eccentricity [Volume 21, Issue 57, 2020, Pages 16-27]

Y

  • Yarahmadi, Hamzeh Provides a method for design based on probabilistic seismic performance [Volume 17, Issue 42, 2015, Pages 28-38]
  • Yazdani, Azad Evaluation of Seismic Risk Effect on Total Reliability Index of Structures, Case Study of Concrete Flexible Frame Frames [Volume 18, Issue 43, 2016, Pages 26-37]
  • Yazdian, Seyed Ahmad Analysis and evalution of effective factors on project communications in Oil, Gas and power plants projects [Volume 22, Issue 60, 2020, Pages 56-74]
  • Yekrangnia, Mohammad Numerical modelling of out of plane behavior of GFRP reinforced masonry walls [Volume 21, Issue 55, 2020, Pages 18-31]
  • Yekrangnia, Mohammad Experimental study on the in-plane behavior of retrofitted brick walls using steel cables with self- centering approach [Volume 24, Issue 68, 2022]
  • Yousefzadeh Fard, Mikaiel Experimental Study of Wollastonite Powder Effects on Dispersive Potential and Mechanical Properties of Clay [Volume 24, Issue 69, 2023]

Z

  • Zahrai, Seyed Mehdi Improving cyclic behavior of steel slit dampers with increasing slit width of yielding plate and studying its seismic performance [Volume 22, Issue 58, 2020, Pages 5-18]
  • Zarei, Ali Laboratory study of the effect of nanosilica on roller concrete used in road pavement [Volume 19, Issue 46, 2017, Pages 65-73]
  • Zare Zardini, Vali Experimental Investigation on the Mechanical properties and determination of the optimal percentage of rubber in concretes containing rubber corrosion [Volume 22, Issue 60, 2020, Pages 19-30]
  • Zarif Sanayei, Hamed Reza Investigation of the performance of modified tuned liquid damper in controlling the response of a structure with linear and nonlinear behavior [Volume 21, Issue 54, 2019, Pages 57-71]
  • Zeigham, Ehsan Multi-objective decision making for risk allocation; Ant Colony Optimization model [Volume 21, Issue 55, 2020, Pages 44-54]
  • Zeighami, Ehsan A Quantitative model for Evaluation of PPP projects success, To attract private investment [Volume 21, Issue 57, 2020, Pages 28-37]
  • Zeighami, Ehsanollah Experimental study behavior of anchor in flexible retaining walls [Volume 23, Issue 65, 2022, Pages 57-64]
  • Ziaie, Reza Numerical analysis of plate load test results in layered soils and comparison with the classic relations [Volume 20, Issue 50, 2018, Pages 19-30]
  • Zohdi, Amir Investigating the Effect of Stakeholder Characteristics on the Performance of Natural Disaster Recovery Projects: Post-earthquake Transportation Network (Case study: Red Crescent Organization) [Volume 23, Issue 65, 2022, Pages 28-45]